![]() |
|||||||
![]() |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
||||||
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Proceedings of the International Congresses on Theoretical and Applied Mechanics (ICTAM)
Since September 4, 1964 the same task
will be fulfilled by the Standing Congress Committee of IUTAM, and local
Organizing Committees to be established. The titles of the volumes and the
names of the publishing firms are given below: 21th International Congress on Theoretical and Applied Mechanics (ICTAM), Warsaw
(Poland), 15-21 August 2004. The
Proceedings, entitled "Mechanics of the 21st Century" and edited by W. Gutkowski and
T.A. Kowaleski, have been published by Springer, Dordrecht, The Netherlands, 2005.
20th International Congress on Theoretical and Applied Mechanics (ICTAM), Chicago
(USA), 27 August-2 September 2000. The
Proceedings, entitled "Mechanics for a New Millenium" and edited by H.Aref and
J.W.Phillips, have been published by Kluwer Academic Publishers, Dordrecht, The
Netherlands, 2001. 19th International Congress on
Theoretical and Applied Mechanics (ICTAM),
Kyoto (Japan), 25-31 August 1996. The
Proceedings, edited by T. Tatsumi, E. Watanabe, T. Kambe, have been published
by Elsevier Science Publishers, Amsterdam, 1997. ISBN
0-444-82446-4. 18th International Congress on
Theoretical and Applied Mechanics (ICTAM), Haifa (Israel), 22-28 August 1992. The
Proceedings, edited by S.R. Bodner, J. Singer, A. Solan and Z. Hashin, have
been published by Elsevier Science Publishers, Amsterdam, 1993.
17th International Congress on
Theoretical and Applied Mechanics (ICTAM), Grenoble (France), 21-27 August 1988. The
Proceedings, edited by P. Germain, M. Piau and D. Caillerie, have been
published by North-Holland, Elsevier Science Publishers, Amsterdam, 1989. 16th International Congress on
Theoretical and Applied Mechanics (ICTAM), Lyngby (Denmark), 19-25 August 1984. The
Proceedings, edited by F.I. Niordson and N. Olhoff, have been published by
Elsevier Science Publishers (North-Holland), Amsterdam, 1985. 15th International Congress on
Theoretical and Applied Mechanics (ICTAM), Toronto (Canada), 17-23 August 1980 The
Proceedings, edited by F.P.J. Rimrott and B. Tabarrok, have been published by
North-Holland Publishing Company, Amsterdam-New York-Oxford, 1980. 14th International
Congress on Theoretical and Applied Mechanics (ICTAM), Delft (Netherlands), 30 August-4 September
1976. The
Proceedings, edited by W.T. Koiter, have been published by North-Holland
Publishing Company, Amsterdam-New York-Oxford, 1976, 1977. 13th International Congress on
Theoretical and Applied Mechanics (ICTAM), Moscow (USSR), 21-26 August 1972. The
Proceedings, edited by E. Becker and G.K. Mikhailov, have been published by
Springer-Verlag, Berlin (Germany), 1973. 12th International Congress on
Theoretical and Applied Mechanics (ICTAM), Stanford, Cal. (USA), 26-31 August 1968. The
Proceedings, edited by M. Hetényi and W.G. Vincenti, have been published by
Springer-Verlag, Berlin (Germany), 1969. 11th International Congress on
Theoretical and Applied Mechanics (ICTAM), Munich (Germany), 30 August-5 September 1964. The
Proceedings, edited by H. Görtler, have been published by Springer-Verlag,
Heidelberger Platz 3, Berlin (Germany), 1966. 10th Congress, Stresa (Italy), 31 August-7 September 1960. Proceedings
published by the Consiglio Nazionale delle Ricerche, Piazelle delle Science 7,
Roma (Italia), printed by Elsevier Publishing Company, Amsterdam-New York,
1962. 9th Congress, Brussels (Belgium), 5-13 September 1956. Proceedings
published by the Organizing Committee (Vol. I to Vol. VIII). Free University of
Brussels, 50, avenue Franklin-Roosevelt, Brussels (Belgium), 1957. 8th Congress, Istanbul (Turkey), 20-28 August 1952. Proceedings
published by the Organizing Committee (Vol. I, Vol. II). Faculty of Sciences, University of Istanbul, P.O. Box 245,
Istanbul (Turkey), 1953. 7th Congress, London (UK), 5-11 September 1948. Proceedings
of the Seventh International Congress for Applied Mechanics, 1948, published by
the Organizing Committee (Introduction, Vol. I, Vol. II - Parts 1 and 2, Vol. III,
Vol. IV). 6th Congress, Paris (France), 22-29 September 1946. Proceedings
not published (was given in the hands of Gauthier-Villars, Paris). 5th Congress, Cambridge (Massachusetts, USA), 12-16 September 1938. Proceedings
of the Fifth International Congress for Applied Mechanics, held at Harvard
University and the Massachusetts Institute of Technology, Cambridge,
Massachusetts, September 12-16, 1938, edited by J.P. den Hartog and H. Peters
(one vol.), John Wiley and Sons, Inc., New York (USA), and Chapman and Hall
Ltd., London (UK), 1939. 4th Congress, Cambridge (UK), 3-9 July 1934. Proceedings
of the Fourth International Congress for Applied Mechanics, Cambridge, UK, 3-9
July, 1934 (one vol.). University Press, Cambridge (UK), 1935. 3rd Congress, Stockholm (Sweden), 24-29 August 1930. Verhandlungen
- Compte rendus - Proceedings of the 3rd International Congress for Applied
Mechanics, herausgegeben von A.C.W. Oseen und W. Weibull (3 vol.). AB. Sveriges
Litografiska Tryckerier, Stockholm, 1931. 2nd Congress, Zürich (Switzerland), 12-17 September 1926. Verhandlungen
- Comptes rendus - Proceedings of the 2nd International Congress for Applied
Mechanics, Zürich, 12-17 September 1926, herausgegeben von E. Meissner (one
vol.). Orell Füssli Verlag, Zürich und Leipzig, 1927. 1st Congress, Delft (Netherlands), 2226 April 1924. Proceedings
of the First International Congress for Applied Mechanics, Delft 1924, edited
by C.B. Biezeno and J.M. Burgers (one vol.). Technische Boekhandel en Drukkerij
J.Waltman Jr., Delft, 1925. No
more copies are available for sale at Delft. | |||||
![]() |
![]() |
![]() |
![]() |
![]() |
||